Home Page Home Page
 Home | Linux Administration | Corporate Services | Resources | About Us
Monthly Server Management One-time Server Services Other Services
Network Administration Network Monitoring Network Security High Availability Load Balancing Data Backup and Recovery
Linux HOWTOs Linux Guides New RFCs Vulnerability list Linux Journal
Testimonials Partners Careers Contact Us Site Map
Booting Linux from DiskOnChip HOWTO

Booting Linux from DiskOnChip HOWTO

Rohit Agarwal


        
     

Vishnu Swaminathan


     
     

20060907

Revision History
Revision 1.02006-09-07Revised by: MG
Last review for LDP publication

This document discusses how to make the Flash Drives Linux bootable. We will describe how to boot from such a drive, instead of from the normal hard drive.


Table of Contents
1. Introduction
1.1. Why this document?
1.2. NFTL vs. INFTL
1.3. Practical goals
2. Reference configuration
3. Assumptions
4. Using M-Systems DiskOnChip 2000 TSOP as an additional storage drive in Linux
4.1. Step 1: Patch the Kernel
4.2. Step 2: Compile the Kernel
4.3. Step 3: Create Nodes
4.4. Step 4: Reboot with the new kernel
4.5. Step 5: Insert M-Systems Driver/Module in the new Kernel
4.6. Step 6: Create a filesystem on the DiskOnChip
4.7. Step 7: Mount the newly created partition to start accessing DOC
5. Install Linux and LILO on DiskOnChip
5.1. Step 1: Copying the DOC firmware onto DiskOnChip
5.2. Step 2: Format DiskOnChip using Dos Utilities
5.3. Step 3: Patch and Compile the kernel 2.4.18
5.4. Step 4: Create nodes
5.5. Step 5: Modify the /etc/module.conf file
5.6. Step 6: Create the initrd image
5.7. Step 7: Insert the DOC driver into the new kernel
5.8. Step 8: Create a filesystem on the DiskOnChip
5.9. Step 9: Build Root Filesystem on the DiskOnChip
5.10. Step 10: Use rdev to specify the DOC root filesystem location to kernel image
5.11. Step 11: Compile lilo-22.3.2
5.12. Step 12: Copy the boot.b file into boot directory of DOC
5.13. Step 13: Modify the /etc/lilo.conf file
5.14. Step 14: Store the new LILO configuration on the DiskOnChip
5.15. Step 15: Modify etc/fstab of DiskOnChip root file system
5.16. Step16: Update Firmware
5.17. Step17: BOOT from DiskOnChip
6. Install Development ToolChain on DiskOnChip
6.1. Step1: Obtain the latest copy of root_fs_i386.ext2
6.2. Step2: Replace the root filesystem of the DiskOnChip
6.3. Step3: Modify etc/fstab of DiskOnChip root file system
6.4. Step4: Reboot
7. References
A. Output of dinfo
B. License
C. About Authors
D. Dedications